AFMOD RS AIO SANDBLASTED - ALLIANCETECH VAPOR

The AFMOD RS AIO
The mod allows the use of 18350 or 18650 batteries. Simply put the battery in your mod and you're good to go; it will adjust automatically according to your battery. Given that this is a mechanical mod, we recommend batteries with discharge currents greater than 20A for 18650 and 10A or greater for 18350. We also recommend a resistance of at least 0.6 ohm and a coil diameter of 2.5mm when used with an 18350 battery to prevent excessive heating of the tube.

The Flave Tank RS 22 hybrid atomizer consumes less power than its sibling, the Flave Tank RS 24. This allows for use in mechanical mods with setups that require less power. You'll find precise and dense flavors on this RS 22 tank.

The Switch, Auto Adjust System!
Significant work has gone into the switch, which comprises no less than 8 parts and 4 keys. Its design prevents electrical arcs on your batteries (thus extending their lifespan). The battery is always in contact with the top of the switch, with the actual contact occurring inside. Here too, we've focused on maximizing the contact surface, which extends around the entire circumference of the piece. This prevents the switch from getting clogged and thus makes maintenance easy.

The switch can also be locked with a simple rotation of the locking ring in less than a quarter turn. At the base of the switch is a stainless steel washer that unscrews, allowing the entire switch to be disassembled for cleaning. By removing this washer, we can slide the lock ring to reveal the keys, marked by a small notch that allows them to be easily removed with a fingernail, making switch disassembly very simple, child's play.

We designed a switch that is as pleasant as possible to use and as simple as possible to maintain, even if it won't require frequent special attention.

The 18350 format will bring a pleasant compactness for everyday use, while offering interesting autonomy for this format thanks to its conductivity.

The 18650 format will, of course, provide superior autonomy, but will also allow the use of lower resistances requiring a higher continuous discharge current than an 18350 battery can provide.

Filling the RS 22 will be done in the same way as with the RS 24, meaning that by removing the top cap, a side filling hole will appear that will accept most Chubby Gorilla bottles on the market. Remember to hold the bottle somewhat vertically and don't hesitate to insert it well into the designated hole.

Remember to perform a complete cleaning of the AFMOD RS AIO before first use to avoid a taste of residual cutting oil, despite all precautions taken in cleaning after machining.

Technical specifications:

• 18350/18650 battery not included.
• Height: 82.7mm (18350) and 112.1mm (18650) with drip tip.
• Lockable switch.
• Silver-plated copper negative connector.
• Gold-plated positive pin.